Performance Software Stage 4 - G8X M3/M4 - 900HP

Components included:

• 960.MDG1.0005

  OBD unlock suitable for BMW M L6 Description >> OBD port unlock >> Programming via OBD port possible afterwards >> For vehicles built after 07/2020 (BMW G-Series) >> Only for vehicles equipped with MDG1 ecu >> Article for BMW M vehicles with one ecu Note: Please deactivate software remote upgrades in the vehicle's privacy options to prevent an unlock delete. Unlock only available in our shop, ecu shipping possible at additional cost.

  1.498,00 € *

• 630.UNIV.0005.B

  VMAX increase - included Description >> increase of V-MAX limitation >> only in combination with Performance Software >> limitation depends on maximum tire speed

  0,00 € *

• 655.UNIV.0007

  Installation - Performance Software Description >> quick and reliable installation >> benefit from our experience

  198,00 € *

• 720.G8XM.0005

  Piston / Rod Combo Kit suitable for BMW S58B30 Description For engine code S58B30 Pistons: >> Forged racing pistons made of 4032 alloy >> Ready for installation incl. piston rings, wrist pin and pin locks >> Reduced compression ratio (other CR on demand) >> Made for stock bore diameter (other diameters on demand) >> Special desgn for boost application >> Rised strenght through higher silicon amount >> Less thermal expansion by nickel addition Connection Rods: >> Forged steel rods >> Power rating over 300hp per rod >> ARP rod bolts included Rod Bearings: >> King Racing bearings >> Sputter style top and bottom bearing

  3.998,00 € *

• 720.G8XM.0010

  engine overhaul kit Description Necessary for in house assembly. This package contains all the individual parts required to rebuild the engine. >> ARP2000 Cylinder head bolts >> Cylinder head gasket >> Cylinder head cover gasket set >> Gasket set oil pan >> King Racing crankshaft bearing shells >> Oil filter >> Various seals and screws >> Motul 300V motorsport oil 5W40 >> Engine coolant

  2.978,00 € *

• 910.G8XM.0005

  racing air filter suitable for M2/M3/M4 G8X Description >> 100% oil-free >> Washable and reusable >> 30% to 40% more air flow >> Relieves the turbocharger >> No extreme change in intake noise >> Cost-effective optimization of air filtration >> No registration, acceptance or special approval required >> Long lifetime

  188,90 € *

• 780.S58M.0005.A

  Turbocharger - Modification - S58 engine Description >> high performance turbocharger upgrade >> basis: OEM turbocharger S58B30 >> power output range: up to 900hp >> enlarged exhaust gas turbine & compressor wheel >> CNC-optimised exhaust housing >> CNC-optimised compressor housing >> enlarged air intake >> intake pipes with enlarged cross-section >> reduction of exhaust gas back pressure >> CNC-optimised compressor turbine blade >> increased air flow >> reduction of exhaust temperature >> optimised tolerances for max. efficiency level >> reinforced sealing for increased boost pressure >> high durability by reinforced shaft bearing >> dynamic precision balancing of components >> export

  5.998,00 € *

• 720.G8XM.0020

  Turbolader S58 - Neuteile Description This information is based on our general experience. The final invoice is based on the actual expenditure, spare parts, fluids and test drives. Expenses over 150 euros will only be charged after prior customer approval.

  358,54 € *

• 790.G8XM.0010

  Downpipes without catalysts - G8X M3/M4 Description >> without catalysts >> reduction of the thermal stress >> more power by reducing back pressure >> completely from rust-proof stainless steel >> elaborate production - made in Germany - >> high fitting accuracy >> export

  998,01 € *

• 850.G8XM.0005

  OPF/GPF delete pipe suitable for G8X M3/M4 Description >> Removes the standard gasoline particulate filter >> Significantly improved sound experience >> Reduction of thermal load >> Increased performance due to back pressure reduction >> High fitting accuracy >> Mounting material included >> Export Note: further adjustments are necessary to prevent the engine control light from lighting up.

  697,99 € *

• 650.F82M.0050.B

  Transmission optimization suitable for BMW M Description >> Consumption minimization through interesting switching points >> earlier activation of the converter lock-up clutch >> Shortening of the switching times >> Torque limiter interests >> with "DSC off" the fastest switching mode active >> Increased start control speed >> Permanent gear display in the instrument cluster >> Clutch holding pressure increased >> Automatic upshifting obstructed >> Optimized sport shift points for sportier driving >> Double-declutching when downshifting Note: This article can only be programmed by infinitas. Detailed options depend on vehicle model.

  548,00 € *

• 960.DYNO.0015

  measurement of engine output, Chassis Dynamometer Description >> Dyno test 1: Determination of engine power at arrival >> Dyno test 2: Determination of engine power at departure >> Superflow SF-880E all wheel drive dynamometer note: article for 2 dyno runs incl. 2nd preparation for dyno.

  298,00 € *

• 96.001.000.015

  workshop - installation Description >> workshop work in house >> 12 AW = 1 hour The calculation of scope will be determined by the actual extent. Possibly necessary new parts, additional working time, fuel, modifications & test drives will be charged separately.

  4.683,84 € *

Optional components:

• 630.UNIV.0010

  Activation Exhaust Burble Description >> Activation of pops and bangs / burble >> only in combination with Performance Software

  245,00 € *

• 950.BDGE.0015

  infinitas boot logo raised Description >> Available in three colors >> 1 piece >> 170 mm

  28,00 € *

• 950.BDGE.0105

  infinitas hood/trunk badge Description >> infinitas logo >> Standard color: black >> One emblem each for hood and trunk

  78,00 € *