Performance software Stage 3+ - 800 HP

Components included:

• 910.F82M.0020.A

  racing air filter suitable for M2C, M3, M4 F8X Description

  180,00 € *

• 720.F82M.0005

  Piston / Rod Combo Kit suitable for BMW S55B30 Description For engine code S55B30 Pistons: >> Forged racing pistons made of 4032 alloy >> Ready for installation incl. piston rings, wrist pin and pin locks >> Reduced compression ratio (other CR on demand) >> Made for stock bore diameter (other diameters on demand) >> Special desgn for boost application >> Rised strenght through higher silicon amount >> Less thermal expansion by nickel addition Connection Rods: >> Forged steel rods >> Power rating over 300hp per rod >> ARP rod bolts included Rod Bearings: >> King Racing bearings >> Sputter style top and bottom bearing

  3.998,00 € *

• 780.S55M.0015

  turbocharger - modification 900 HP - S55B30 Description >> high performance turbocharger upgrade >> basis: OEM turbocharger S55B30 >> power output range: up to 900 hp >> enlarged exhaust gas turbine & compressor wheel >> CNC-optimised exhaust housing >> CNC-optimised compressor housing >> enlarged air intake >> intake pipes with enlarged cross-section >> Cyl. 1-3: intake pipe made of CNC milled aluminum >> Cyl. 4-6: intake pipe made of PU plastic >> reduction of exhaust gas back pressure >> CNC-optimised compressor turbine blade >> increased air flow >> reduction of exhaust temperature >> optimised tolerances for max. efficiency level >> reinforced sealing for increased boost pressure >> high durability by reinforced shaft bearing >> dynamic precision balancing of components >> export Notes: change of engine oil necessary. In exchange for stock turbochargers!

  6.198,00 € *

• 930.F80M.0005

  EU5 injectors

  1.797,99 € *

• 910.FXXM.0035.B

  upgrade spark plug Description >> improved combustion quality >> optimal spark >> smoother engine run >> colder heat range >> adjusted electrode

  257,94 € *

• 790.F80M.0005.A

  Downpipes - w/o catalyst for M2C/M3/M4 Description >> Made of high grade stainless steel >> TIG welded >> Deletes the factory installed primary catalyst >> Reduction of the thermal stress >> More power by reducing back pressure >> Completely from rust-proof stainless steel >> Made in Europe >> High fitting accuracy >> Export For vehicles with and without GPF.

  998,01 € *

• 960.UNIV.0135

  water/methanol injection Description >> more power through charge air cooling >> better performance at hot ambient temperatures >> lowered combustion chamber temperatures >> spares the engine >> better fuel consumption >> boost pressure gauge >> boost pressure dependend injection mass >> version for

  774,00 € *

• 650.F82M.0050.B

  Transmission optimization suitable for BMW M Description >> Consumption minimization through interesting switching points >> earlier activation of the converter lock-up clutch >> Shortening of the switching times >> Torque limiter interests >> with "DSC off" the fastest switching mode active >> Increased start control speed >> Permanent gear display in the instrument cluster >> Clutch holding pressure increased >> Automatic upshifting obstructed >> Optimized sport shift points for sportier driving >> Double-declutching when downshifting Note: This article can only be programmed by infinitas. Detailed options depend on vehicle model.

  548,00 € *

• 630.UNIV.0005.B

  VMAX increase - included Description >> increase of V-MAX limitation >> only in combination with Performance Software >> limitation depends on maximum tire speed

  0,00 € *

• 96.001.000.015

  workshop - installation Description >> workshop work in house >> 12 AW = 1 hour The calculation of scope will be determined by the actual extent. Possibly necessary new parts, additional working time, fuel, modifications & test drives will be charged separately.

  4.197,00 € *

Optional components:

• 720.F82M.0010

  engine overhaul kit

  2.380,00 € *

• 720.S55M.0005

  Crank Hub FIx Description >> No complex drilling of the crankshaft necessary! >> One-piece crank stroke with friction disk >> Force-fit connection to the crankshaft >> Incl. new, original BMW bolt The BMW S55 engines are known to suffer in some cases, even in original condition, from misaligned timing due to crankshaft sprocket rotation. The reason for this is not loosened central screws, but the so-called phenomenon of torque overboost. At low engine speeds, the torque actually acting on components increases due to vibrations of the combustion process. Thus, an oscillating torque always acts on the crankshaft flange, which can eventually lead to slippage of the shaft-hub connection. The reason why we deliberately decided against pins or other variants of fixation is that for optimum retention of the pins, they must be inserted with a fit in the crank hub and crankshaft. Not only is it not possible to produce bores with such close tolerances due to the impractical crankshaft drilling process, but also, from a purely design point of view, it is not possible to create clearly defined fits in this application. The result is that vibrations weaken the inaccurately fitted pins and, in the worst case, cause them to break off. Instead, we equip our Crank Hub Fix with a so-called grip disc. This is a small plate coated with diamond particles, which increases the maximum transmissible torque of the shaft-hub connection by up to 4 times, as the diamond particles bite into the hub and crankshaft. All without drilling the crankshaft.

  1.098,00 € *

• 630.UNIV.0010

  Activation Exhaust Burble Description >> Activation of pops and bangs / burble >> only in combination with Performance Software

  198,00 € *

• 960.DYNO.0015

  measurement of engine output, Chassis Dynamometer Description >> Dyno test 1: Determination of engine power at arrival >> Dyno test 2: Determination of engine power at departure >> Superflow SF-880E all wheel drive dynamometer note: article for 2 dyno runs incl. 2nd preparation for dyno.

  298,00 € *

• 950.BDGE.0105

  infinitas hood/trunk badge Description >> infinitas logo >> Standard color: black >> One emblem each for hood and trunk

  78,00 € *

• 920.UNIV.0010

  WMI Fail-Safe Description >> Halleffect Flow Sensor with Measuring Turbine >> Measuring Range Up To 1200cc Note: Can only be used with our data display with WMI control.

  298,00 € *

• 950.BDGE.0015

  infinitas boot logo raised Description >> Available in three colors >> 1 piece >> 170 mm

  28,00 € *